Issue Date	Title	Author(s)
23-Nov-2016	A variational framework for high-order mesh generation	Turner, M; Peiro, J; Moxey, D; Canann, S; Owen, S, et al
1-Jan-2017	A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing	Aremu, AO; Brennan-Craddock, J; Panesar, A; Ashcroft, IA; Hague, RJM, et al
1-Jan-2015	A water jet thruster for an aquatic micro air vehicle	Siddall, R; Kovač, M
1-Oct-2023	A water vapour fuelled Hall Effect Thruster: characterization and comparison with oxygen	Munoz Tejeda, JM; Knoll, A
1-Aug-2018	Accelerating high-order mesh optimisation with an architecture-independent programming model	Eichstaedt, JR; Green, M; Turner, M; Peiro, J; Moxey, D, et al
22-Mar-2023	Accuracy of distributed strain sensing with single mode fibre in composite laminates under thermal and vibration loads	Li, Y; Sharif Khodaei, Z
15-Jan-2023	Acoustic metamaterials with controllable bandgap gates based on magnetorheological elastomers	Gorshkov, VN; Bereznykov, OV; Boiger, GK; Sareh, P; Fallah, AS
4-Jan-2016	Active Flow Control at Low Reynolds Numbers by Periodic Airfoil Morphing	Jones, G; Santer, M; Papadakis, G; Debiasi, M
25-Feb-2024	Active flow control for bluff body drag reduction using reinforcement learning with partial measurements	Xia, C; Zhang, J; Kerrigan, E; Rigas, G
17-Jun-2020	Active health monitoring of thick composite structures by embedded and surface-mounted piezo diagnostic layer	Feng, T; Dimitrios, B; Aliabadi, MHF; Feng, T
Jul-2024	Active learning and Bayesian optimization: a unified perspective to learn with a goal	Di Fiore, F; Nardelli, M; Mainini, L
1-Nov-2022	Adaptive sampling for interpolation of reduced-order aeroelastic systems	Goizueta, N; Wynn, A; Palacios, R;
13-Jan-2014	Adaptive shock control bumps	Jinks, E; Bruce, P; Santer, M
11-Aug-2019	Additive manufacturing of bone-inspired structural-power composites	Plocher, J; Lee, C; Panesar, A
4-Feb-2022	Additive manufacturing with fibre-reinforcement - design guidelines and investigation into the influence of infill patterns	Plocher, J; Wioland, J-B; Panesar, A
1-Feb-2020	Aerial additive building manufacturing: three-dimensional printing of polymer structures using drones	Dams, B; Sareh, S; Zhang, K; Shepherd, P; Kovac, M, et al
21-Sep-2022	Aerial additive manufacturing with multiple autonomous robots	Zhang, K; Chermprayong, P; Xiao, F; Tzoumanikas, D; Dams, B, et al
18-May-2022	Aerial-aquatic robots capable of crossing the air-water boundary and hitchhiking on surfaces.	Li, L; Wang, S; Zhang, Y; Song, S; Wang, C, et al
31-Jan-2016	Aero-Structural Design Optimization of Adaptive Shock Control Bumps	Jinks, E; Santer, M; Bruce, P;
14-Jun-2022	Aeroacoustic analysis of a subsonic jet using the discontinuous Galerkin method	Lindblad, D; Sherwin, S; Cantwell, C; Lawrence, J; Proenca, A, et al