44
IRUS TotalDownloads
Altmetric
Knee joint line obliquity causes tibiofemoral subluxation that alters contact areas and meniscal loading
File | Description | Size | Format | |
---|---|---|---|---|
03635465211020478.pdf | Published version | 2.41 MB | Adobe PDF | View/Open |
Title: | Knee joint line obliquity causes tibiofemoral subluxation that alters contact areas and meniscal loading |
Authors: | Amis, A Athwal, K Willinger, L Wang, D Williams, A |
Item Type: | Journal Article |
Abstract: | Background: Little scientific evidence is available regarding the effect of knee joint line obliquity (JLO) before and after coronal realignment osteotomy. Hypotheses: Higher JLO would lead to abnormal relative position of the femur on the tibia, a shift of the joint contact areas, and elevated joint contact pressures. Study Design: Descriptive laboratory study. Methods: 10 fresh-frozen human cadaveric knees (age, 59 ± 5 years) were axially loaded to 1500 N in a materials testing machine with the joint line tilted 0°, 4°, 8°, and 12° varus (“downhill” medially) and valgus, at 0° and 20° of knee flexion. The mechanical compression axis was aligned to the center of the tibial plateau. Contact pressure and contact area were recorded by pressure sensors inserted between the tibia and femur below the menisci. Changes in relative femoral and tibial position in the coronal plane were obtained by an optical tracking system. Results: Both medial and lateral JLO caused significant tibiofemoral subluxation and pressure distribution changes. Medial (varus) JLO caused the femur to subluxate medially down the coronal slope of the tibial plateau, and vice versa for lateral (valgus) downslopes (P < .01), giving a 6-mm range of subluxation. The areas of peak pressure moved 12 mm and 8 mm across the medial and lateral condyles, onto the downhill meniscus and the “uphill” tibial spine. Changes in JLO had only small effects on maximum contact pressures. Conclusion: A 4° change of JLO during load bearing caused significant mediolateral tibiofemoral subluxation. The femur slid down the slope of the tibial plateau to abut the tibial eminence and also to rest on the downhill meniscus. This caused large movements of the tibiofemoral contact pressures across each compartment. Clinical Relevance: These results provide important information for understanding the consequences of creating coronal JLO and for clinical practice in terms of osteotomy planning regarding the effect on JLO. This information provides guidance regarding the choice of single- or double-level osteotomy. Excessive JLO alteration may cause abnormal tibiofemoral joint articulation and chondral or meniscal loading. |
Issue Date: | 1-Jul-2021 |
Date of Acceptance: | 19-Feb-2021 |
URI: | http://hdl.handle.net/10044/1/88231 |
DOI: | 10.1177/03635465211020478 |
ISSN: | 0363-5465 |
Publisher: | SAGE Publications |
Start Page: | 2351 |
End Page: | 2360 |
Journal / Book Title: | American Journal of Sports Medicine |
Volume: | 49 |
Issue: | 9 |
Copyright Statement: | © 2021 The Author(s). This article is distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 License (https://creativecommons.org/licenses/by-nc-nd/4.0/) which permits non-commercial use, reproduction and distribution of the work as published without adaptation or alteration, without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage). |
Sponsor/Funder: | Fortius Research and Education Foundation |
Funder's Grant Number: | N/A |
Keywords: | biomechanics cartilage contact pressure coronal slope joint line obliquity knee osteotomy meniscus loading tibiofemoral subluxation 0903 Biomedical Engineering 0913 Mechanical Engineering 1106 Human Movement and Sports Sciences Orthopedics |
Publication Status: | Published |
Online Publication Date: | 2021-06-14 |
Appears in Collections: | Mechanical Engineering Faculty of Engineering |
This item is licensed under a Creative Commons License