Compression strength of stainless steel cross-sections

File Description SizeFormat 
Ashraf et al. (2006) - Compression strength of stainless steel cross-sections.pdfAccepted version189.76 kBAdobe PDFView/Open
Title: Compression strength of stainless steel cross-sections
Authors: Ashraf, M
Gardner, L
Nethercot, DA
Item Type: Journal Article
Abstract: A conceptually new approach which recognises the continuous nature of the stress–strain characteristic of stainless steel has recently been developed by the authors for the prediction of the strength of compressed plate elements in stainless steel members. This method does not use the classification system found in modern codes dealing with the structural design of carbon steel members. The original development was limited to plate elements supported on both longitudinal edges; the basic concept is expanded herein to cover a wider range of cases. The resulting design procedure forms part of a general treatment of stainless steel structural members that predicts resistances significantly in excess of those obtained from currently available design methods. These resistances are found to accord well with the observed strength of sections obtained in laboratory tests.
Issue Date: 1-Jan-2006
Date of Acceptance: 22-Apr-2005
URI: http://hdl.handle.net/10044/1/60350
DOI: https://dx.doi.org/10.1016/j.jcsr.2005.04.010
ISSN: 0143-974X
Publisher: Elsevier
Start Page: 105
End Page: 115
Journal / Book Title: Journal of Constructional Steel Research
Volume: 62
Issue: 1-2
Copyright Statement: © 2006 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/
Keywords: Science & Technology
Technology
Construction & Building Technology
Engineering, Civil
Engineering
cross-section slenderness
cross-section strength
deformation capacity
enhanced corner strength
open sections
stainless steel
HOLLOW SECTIONS
BEHAVIOR
COLUMNS
BEAMS
0905 Civil Engineering
Civil Engineering
Publication Status: Published
Online Publication Date: 2005-07-14
Appears in Collections:Faculty of Engineering
Civil and Environmental Engineering



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Creative Commons