Hysteretic behaviour of high strength S690 steel materials under low cycle high strain tests

File Description SizeFormat 
Accepted Version-Ho et al-JCSR-2018.pdfAccepted version4.03 MBAdobe PDFView/Open
Title: Hysteretic behaviour of high strength S690 steel materials under low cycle high strain tests
Authors: Ho, HC
Liu, X
Chung, KF
Elghazouli, AY
Xiao, M
Item Type: Journal Article
Abstract: This paper describes a detailed experimental investigation into structural behaviour of S690 steel materials under both monotonic and cyclic loading conditions. In addition to 6 monotonic tensile tests, which were conducted to establish basic mechanical properties, 36 cyclic tests were then carried out in order to examine hysteretic behaviour of the S690 steel materials under various target strains and loading frequencies. The experimental arrangements used for the monotonic and the cyclic tests are described, and a detailed account of the test results is provided. The monotonic tests showed that all the S690 steel specimens satisfied the ductility requirements stipulated in current European provisions which are typically based solely on monotonic behaviour. In the cyclic tests, most specimens were able to complete 20 cycles with target strain amplitudes of ±2.5%, ±5.0%, ±7.5%, and ±10.0%, under loading frequencies of 0.1, 0.5, 1.0 and 2.0 Hz. However, some specimens fractured at the 20th cycle when the target strains were ±10.0% irrespective of the loading frequency. Additionally, significant strength enhancement due to strain hardening was observed and quantified in the cyclic tests, depending on the level of target strains. The results additionally illustrated the importance of using actual instantaneous cross-sectional diameters for evaluating true stresses in order to obtain actual representative hysteretic curves. In general, the study highlights the importance of establishing seismic ductility requirements based on cyclic tests, particularly for high strength steel materials. It also provides a detailed assessment of the hysteretic characteristics, which can be directly employed to develop reliable constitutive models for high strength S690 steel materials under seismic loading conditions.
Issue Date: 22-Mar-2018
Date of Acceptance: 15-Mar-2018
URI: http://hdl.handle.net/10044/1/58407
DOI: https://dx.doi.org/10.1016/j.engstruct.2018.03.041
ISSN: 0141-0296
Publisher: Elsevier
Start Page: 222
End Page: 236
Journal / Book Title: Engineering Structures
Volume: 165
Copyright Statement: © 2018 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/
Keywords: 0905 Civil Engineering
Civil Engineering
Publication Status: Published
Appears in Collections:Faculty of Engineering
Civil and Environmental Engineering



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Creative Commons