22
IRUS Total
Downloads
  Altmetric

Ba-filled Ni-Sb-Sn based skutterudites with anomalously high lattice thermal conductivity

File Description SizeFormat 
c6dt01298a.pdfPublished version14.72 MBAdobe PDFView/Open
Title: Ba-filled Ni-Sb-Sn based skutterudites with anomalously high lattice thermal conductivity
Authors: Paschinger, W
Rogl, G
Grytsiv, A
Michor, H
Heinrich, PR
Mueller, H
Puchegger, S
Klobes, B
Hermann, RP
Reinecker, M
Eisenmenger-Sitter, C
Broz, P
Bauer, E
Giester, G
Zehetbauer, M
Rogl, PF
Item Type: Journal Article
Abstract: Novel filled skutterudites BayNi4Sb12−xSnx (ymax = 0.93) have been prepared by arc melting followed by annealing at 250, 350 and 450 °C up to 30 days in vacuum-sealed quartz vials. Extension of the homogeneity region, solidus temperatures and structural investigations were performed for the skutterudite phase in the ternary Ni–Sn–Sb and in the quaternary Ba–Ni–Sb–Sn systems. Phase equilibria in the Ni–Sn–Sb system at 450 °C were established by means of Electron Probe Microanalysis (EPMA) and X-ray Powder Diffraction (XPD). With rather small cages Ni4(Sb,Sn)12, the Ba–Ni–Sn–Sb skutterudite system is perfectly suited to study the influence of filler atoms on the phonon thermal conductivity. Single-phase samples with the composition Ni4Sb8.2Sn3.8, Ba0.42Ni4Sb8.2Sn3.8 and Ba0.92Ni4Sb6.7Sn5.3 were used to measure their physical properties, i.e. temperature dependent electrical resistivity, Seebeck coefficient and thermal conductivity. The resistivity data demonstrate a crossover from metallic to semiconducting behaviour. The corresponding gap width was extracted from the maxima in the Seebeck coefficient data as a function of temperature. Single crystal X-ray structure analyses at 100, 200 and 300 K revealed the thermal expansion coefficients as well as Einstein and Debye temperatures for Ba0.73Ni4Sb8.1Sn3.9 and Ba0.95Ni4Sb6.1Sn5.9. These data were in accordance with the Debye temperatures obtained from the specific heat (4.4 K < T < 140 K) and Mössbauer spectroscopy (10 K < T < 290 K). Rather small atom displacement parameters for the Ba filler atoms indicate a severe reduction in the “rattling behaviour” consistent with the high levels of lattice thermal conductivity. The elastic moduli, collected from Resonant Ultrasonic Spectroscopy ranged from 100 GPa for Ni4Sb8.2Sn3.8 to 116 GPa for Ba0.92Ni4Sb6.7Sn5.3. The thermal expansion coefficients were 11.8 × 10−6 K−1 for Ni4Sb8.2Sn3.8 and 13.8 × 10−6 K−1 for Ba0.92Ni4Sb6.7Sn5.3. The room temperature Vickers hardness values vary within the range from 2.6 GPa to 4.7 GPa. Severe plastic deformation via high-pressure torsion was used to introduce nanostructuring; however, the physical properties before and after HPT showed no significant effect on the materials thermoelectric behaviour.
Issue Date: 21-Jun-2016
Date of Acceptance: 29-May-2016
URI: http://hdl.handle.net/10044/1/55191
DOI: https://dx.doi.org/10.1039/c6dt01298a
ISSN: 1477-9234
Publisher: Royal Society of Chemistry
Start Page: 11071
End Page: 11100
Journal / Book Title: Dalton Transactions
Volume: 45
Issue: 27
Copyright Statement: This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Keywords: Science & Technology
Physical Sciences
Chemistry, Inorganic & Nuclear
Chemistry
SEVERE PLASTIC-DEFORMATION
HIGH-PRESSURE TORSION
HALF-HEUSLER ALLOYS
THERMOELECTRIC PROPERTIES
MECHANICAL-PROPERTIES
PHYSICAL-PROPERTIES
ELECTRICAL-RESISTIVITY
ELECTRONIC-STRUCTURE
PHASE-EQUILIBRIA
STAGE-IV
cond-mat.mtrl-sci
0302 Inorganic Chemistry
0399 Other Chemical Sciences
Inorganic & Nuclear Chemistry
Publication Status: Published
Appears in Collections:Chemical Engineering
Faculty of Engineering