The coupled effect of aspect ratio and strut micro-deformation mode on the mechanical properties of lattice structures
File(s)1-s2.0-S016766362400036X-main.pdf (8.75 MB)
Published version
Author(s)
Kechagias, S
Karunaseelan, K
Oosterbeek, R
Jeffers, J
Type
Journal Article
Abstract
Lattice structures have been integrated into various industrial applications owing to their unique compressive properties. Mechanical characterisation is usually done by testing a small specimen which is assumed representative of the utilised lattice. A specimen's aspect ratio (height to diameter/width ratio) is known to affect compressive properties in various engineering materials, yet its influence in lattices has not been investigated thoroughly. In this study, titanium lattice specimens designed with different aspect ratios (ranging from 0.5 to 3.0) and four different topologies (displaying bend and stretch-dominated micro-deformation modes) were fabricated using powder bed fusion and tested in quasi-static compression. Their compressive properties and failure modes were evaluated using acquired stress-strain curves and digital image correlation (DIC) analysis. Reducing the aspect ratio in the bend-dominated lattices increased the measured stiffness of the specimens by up to 40%. Conversely, increasing the aspect ratio of the stretch dominated lattices increased the measured stiffness of the specimens by up to 30%. For both topology types, decreasing the aspect ratio increased the measured strength of the specimens, but the effect was less than that observed for stiffness. Different responses were attributed to gradient strain accumulation and different failure patterns (densification versus shear banding) that were observed depending on the combination of aspect ratio and topology. These findings are particularly important for better predicting the mechanical behaviour of lattice-based components that have aspect ratios outside the range of conventional test specimens.
Date Issued
2024-04
Online Publication Date
2024-03-06T12:52:55Z
Date Acceptance
2024-02-04
ISSN
0167-6636
Publisher
Elsevier
Journal / Book Title
Mechanics of Materials
Volume
191
Copyright Statement
© 2024 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
License URI
Identifier
https://www.sciencedirect.com/science/article/pii/S016766362400036X?ref=pdf_download&fr=RR-2&rr=86025fd29a8c633a
Publication Status
Published
Article Number
104944
Date Publish Online
2024-02-12