Triboelectrochemistry: influence of applied electrical potentials on friction and wear of lubricated contacts
File(s)
Published version
Author(s)
Spikes, Hugh A
Type
Journal Article
Abstract
Research on the effects of applied electrical potential on friction and wear, a topic sometimes termed “Triboelectrochemistry”, has been reviewed. Historically, most such research has focussed on aqueous lubricants, whose relatively high electrical conductivities enable use of three-electrode electrochemical kinetic techniques, in which the electrode potential at a single electrode | fluid interface is controlled relative to a suitable reference electrode. This has led to identification of several different mechanisms by which applied electrode potentials can influence friction and wear. Of these, the most practically important are: (i) promotion of adsorption/desorption of polar additives on tribological surfaces by controlling the latters’ surface charges; (ii) stimulation or suppression of redox reactions involving either oxygen or lubricant additives at tribological surfaces. In recent years, there has been growing interest in the effects of applied electrical potentials on rubbing contacts lubricated by non-aqueous lubricants, such as ester- and hydrocarbon-based oils. Two different approaches have been used to study this. In one, a DC potential difference in the mV to V range is applied directly across a thin film, lubricated contact to form a pair of electrode | fluid interfaces. This has been found to promote some additive reactions and to influence friction and wear. However, little systematic exploration has been reported of the underlying processes and generally the electrode potentials at the interfaces have not been well defined. The second approach is to increase the conductivity of non-aqueous lubricants by adding secondary electrolytes and/or using micro/nanoscale electrodes, to enable the use of three-electrode electrochemical methods at single metal | fluid interfaces, with reference and counter electrodes. A recent development has been the introduction of ionic liquids as both base fluids and lubricant additives. These have relatively high electrical conductivities, allowing control of applied electrode potentials of individual metal | fluid interfaces, again with reference and counter electrodes. The broadening use of “green”, aqueous-based lubricants also enlarges the possible future scope of applied electrode potentials in tribology. From research to date, there would appear to be considerable opportunities for using applied electrical potentials both to promote desirable and to supress unwanted lubricant interactions with rubbing surfaces, thereby improving the tribological performance of lubricated machine components.
Date Issued
2020-09
Date Acceptance
2020-08-04
Citation
Tribology Letters, 2020, 68 (3), pp.1-27
ISSN
1023-8883
Publisher
Springer Science and Business Media LLC
Start Page
1
End Page
27
Journal / Book Title
Tribology Letters
Volume
68
Issue
3
Copyright Statement
© The Author(s) 2020. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long
as you give appropriate credit to the original author(s) and the source,
provide a link to the Creative Commons licence, and indicate if changes
were made. The images or other third party material in this article are
included in the article’s Creative Commons licence, unless indicated
otherwise in a credit line to the material. If material is not included in
the article’s Creative Commons licence and your intended use is not
permitted by statutory regulation or exceeds the permitted use, you will
need to obtain permission directly from the copyright holder. To view a
copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
as you give appropriate credit to the original author(s) and the source,
provide a link to the Creative Commons licence, and indicate if changes
were made. The images or other third party material in this article are
included in the article’s Creative Commons licence, unless indicated
otherwise in a credit line to the material. If material is not included in
the article’s Creative Commons licence and your intended use is not
permitted by statutory regulation or exceeds the permitted use, you will
need to obtain permission directly from the copyright holder. To view a
copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
License URL
Sponsor
Engineering & Physical Science Research Council (EPSRC)
Identifier
https://link.springer.com/article/10.1007%2Fs11249-020-01328-3
Grant Number
EP/P030211/1
Subjects
0912 Materials Engineering
0913 Mechanical Engineering
Mechanical Engineering & Transports
Publication Status
Published
Article Number
90
Date Publish Online
2020-08-14