Design of spiral scaling magnets for LhARA and FETS-FFA
File(s)
Author(s)
Kuo, Ta-Jen
Type
Thesis or dissertation
Abstract
Fixed Field Alternating gradient (FFA) accelerators represent a promising technology for high intensity and medical accelerator applications, offering relativistic energy capability, freedom from magnet ramping constraints, high repetition rate potential, and variable extraction energy without an energy degrader. This thesis presents a magnet design framework for scaling FFA configurations with flat pole geometries and radially distributed trim coils, allowing the field gradient to be varied radially through adjustment of individual coil currents.
The geometric requirements of the scaling FFA magnet are derived through analysis of its focusing properties, establishing that the magnet boundaries must conform to a spiral profile, the radial sector being a special case with zero spiral angl, and that the trim coil geometry must approximate arcs centred on the machine axis. An alternative derivation of the scaling law is presented as an original contribution, emphasising the transition from the field required along the trajectory to the final field distribution in polar form. Current settings are optimised to enforce a power law radial field distribution across each magnet, with longitudinal field clamps incorporated to better satisfy the scaling condition.
The author developed a suite of Python codes to parametrically construct magnet and coil geometries, interface with OPERA-3D, optimise coil currents, and extract field maps for tracking. The framework is applied to two lattices: the FETS-FFA, a novel doublet spiral lattice for a proposed ISIS-II upgrade, achieving a field index range of k=6.20–8.75 and tunes spanning 3-4, with maximum ring tune variation of ±0.04; and LhARA, a singlet spiral FFA optimised across 57 MeV and 127 MeV extraction energies, with tune points clear of resonances up to fourth order.
Finally, a radial sector prototype magnet is presented, designed and fabricated for experimental validation and as a benchmark for OPERA models.
The geometric requirements of the scaling FFA magnet are derived through analysis of its focusing properties, establishing that the magnet boundaries must conform to a spiral profile, the radial sector being a special case with zero spiral angl, and that the trim coil geometry must approximate arcs centred on the machine axis. An alternative derivation of the scaling law is presented as an original contribution, emphasising the transition from the field required along the trajectory to the final field distribution in polar form. Current settings are optimised to enforce a power law radial field distribution across each magnet, with longitudinal field clamps incorporated to better satisfy the scaling condition.
The author developed a suite of Python codes to parametrically construct magnet and coil geometries, interface with OPERA-3D, optimise coil currents, and extract field maps for tracking. The framework is applied to two lattices: the FETS-FFA, a novel doublet spiral lattice for a proposed ISIS-II upgrade, achieving a field index range of k=6.20–8.75 and tunes spanning 3-4, with maximum ring tune variation of ±0.04; and LhARA, a singlet spiral FFA optimised across 57 MeV and 127 MeV extraction energies, with tune points clear of resonances up to fourth order.
Finally, a radial sector prototype magnet is presented, designed and fabricated for experimental validation and as a benchmark for OPERA models.
Version
Open Access
Date Issued
2026-06-12
Date Awarded
2026-09-01
Copyright Statement
Attribution-NonCommercial 4.0 International Licence (CC BY-NC)
License URL
Advisor
Pasternak, Jaroslaw
Lagrange, Jean-Baptiste
Publisher Department
Department of Physics
Publisher Institution
Imperial College London
Qualification Level
Doctoral
Qualification Name
Doctor of Philosophy (PhD)
