Evaluation of ejector performance for an organic Rankine cycle combined power and cooling system
File(s)
Accepted version
Author(s)
Zhang, K
Chen, X
Markides, CN
Yang, Y
Shen, S
Type
Journal Article
Abstract
Power-generation systems based on organic Rankine cycles (ORCs) are well suited and increasingly employed in the conversion of thermal energy from low temperature heat sources to power. These systems can be driven by waste heat, for example from various industrial processes, as well as solar or geothermal energy. A useful extension of such systems involves a combined ORC and ejector-refrigeration cycle (EORC) that is capable, at low cost and complexity, of producing useful power while having a simultaneous capacity for cooling that is highly desirable in many applications. A significant thermodynamic loss in such a combined energy system takes place in the ejector due to unavoidable losses caused by irreversible mixing in this component. This paper focuses on the flow and transport processes in an ejector, in order to understand and quantify the underlying reasons for these losses, as well as their sensitivity to important design parameters and operational variables. Specifically, the study considers, beyond variations to the geometric design of the ejector, also the role of changing the external conditions across this component and how these affect its performance; this is not only important in helping develop ejector designs in the first instance, but also in evaluating how the performance may shift (in fact, deteriorate) quantitatively when the device (and wider energy system within which it functions) are operated at part load, away from their design/operating points. An appreciation of the loss mechanisms and how these vary can be harnessed to propose new and improved designs leading to more efficient EROC systems, which would greatly enhance this technology’s economic and environmental potential. It is found that some operating conditions, such as a high pressure of the secondary and discharge fluid, lead to higher energy losses inside the ejector and limit the performance of the entire system. Based on the ejector model, an optimal design featuring a smoothed nozzle edge and an improved nozzle position is found to achieve an improved entrainment ratio, significantly better performance and reduced energy losses in the ejector.
Date Issued
2016-10-20
Date Acceptance
2016-10-02
Citation
Applied Energy, 2016, 184, pp.404-412
ISSN
0306-2619
Publisher
Elsevier
Start Page
404
End Page
412
Journal / Book Title
Applied Energy
Volume
184
Copyright Statement
© 2016 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/
Identifier
http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000389785200034&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=1ba7043ffcc86c417c072aa74d649202
Subjects
Science & Technology
Technology
Energy & Fuels
Engineering, Chemical
Engineering
Ejector
Refrigeration
Combined cooling
Heating and power
2ND LAW ANALYSIS
REFRIGERATION CYCLE
THERMODYNAMIC CYCLE
STEAM-EJECTOR
SOLAR-ENERGY
HEAT
OPTIMIZATION
TECHNOLOGIES
WORKING
AMMONIA
Energy
09 Engineering
14 Economics
Publication Status
Published