From micro to nano: polypropylene composites reinforced with TEMPO-oxidised cellulose of different fibre widths
File(s)
Published version
Author(s)
Gaduan, Andre N
Solhi, Laleh
Kontturi, Eero
Lee, Koon-Yang
Type
Journal Article
Abstract
TEMPO-oxidised cellulose fibres are often explored as nano-reinforcement for polymers. However, it is unclear whether micrometre-sized TEMPO-oxidised cellulose fibres also possess similar reinforcing potential. In this work, we report the mechanical response of polypropylene (PP) composites reinforced with TEMPO-oxidised cellulose (TOC) of different fibre widths. Micrometre-sized TOC fibres (TOCF) containing sodium carboxylate (TOCF-Na) and free hydroxyl (TOCF-H) groups, as well as nano-sized TOC nanofibrils (TOCN) were produced from dissolving pulp and incorporated into PP matrix via melt-extrusion. It was found that model PP composites containing micrometre-sized TOCF-Na and TOCF-H possessed the highest tensile modulus of up to 2.5 GPa; 40% improvement over neat PP and 30% increase over PP/TOCN composite. No significant differences in the tensile strength of PP/TOCF-Na and PP/TOCF-H composites were observed when compared to neat PP. The incorporation of nano-sized TOCN into PP however, led to a 6% decrease in tensile strength. Single-edge notched beam fracture toughness test further showed that PP/TOCN composite possessed the lowest fracture toughness of 2.52 MPa m1/2; a decrease of 18% over PP reinforced with micrometre-sized TOCF-Na and TOCF-H. Our study shows that micrometre-sized TOCFs serve as better reinforcement for polymers compared to nano-sized TOCN. This is attributed to the better dispersion of TOCF in the PP matrix. Furthermore, the presence of surface microfibrillation on TOCFs also enhanced the quality of the TOCF-PP interface through mechanical interlocking and local stiffening of the PP matrix.
Date Issued
2021-03-01
Date Acceptance
2020-12-13
Citation
Cellulose, 2021, 28 (5), pp.2947-2963
ISSN
0969-0239
Publisher
Springer
Start Page
2947
End Page
2963
Journal / Book Title
Cellulose
Volume
28
Issue
5
Copyright Statement
© The Author(s) 2021. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
License URL
Identifier
http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000617113800001&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=1ba7043ffcc86c417c072aa74d649202
Subjects
Science & Technology
Technology
Physical Sciences
Materials Science, Paper & Wood
Materials Science, Textiles
Polymer Science
Materials Science
Biocomposite
Nanocellulose
Pulp
Tensile properties
Extrusion
Publication Status
Published
Date Publish Online
2021-02-11