Optimal path-tracking of virtual race-cars using gain-scheduled preview control
Author(s)
Thommyppillai, Mark P.
Type
Thesis or dissertation
Abstract
In the search for a more capable minimum-lap-time-prediction program, the presence of an alternative
solution has been introduced, which requires the development of a high-quality path-tracking
controller. Preview Discrete Linear Quadratic Regulator (DLQR) theory has been used to generate
optimal tracking control gains for a given car model. The calculation of such gains are performed
off-line, reducing the computational burden during simulated tracking trials. A simple car model
was used to develop limit-tracking control strategies, first for an understeering and then for an
oversteering car, travelling at a constant forward speed. Adaptation in the controller, with respect
to front-/rear-lateral-slip ratio, facilitated superior tracking performance over the non-adaptive
counterpart in a number of challenging tracking manoeuvres.
Once complete, development work was focused on the control of a complex car model. Such
a model required an extension to the preview DLQR theory, to allow variable speed, two-channel
(x,y) optimal path tracking. Significant benefits were observed when using an adaptive control
strategy, firstly scheduling with respect to forward ground speed and then including adaptation
with respect to mean front-lateral-slip ratio. A variable weighting strategy was used to suppress
oscillations in the tracking controller when operating near the limit of the car. Such a strategy
places a higher cost on control effort expenditure, relative to tracking error, as the car approaches
the limit of the front axle. Further oscillatory behaviour, due to the presence of lightly-damped
eigenmodes, was suppressed by increasing the car’s suspension stiffness and damping parameters.
The tracking controller, that has resulted from the work documented by this thesis, has demonstrated
high-quality tracking when operating in a number of different scenarios, including lateral
limit tracking. Variable speed limit tracking is suggested as the next development step, which will
then allow the controller to be implemented in initial learning trials. Successful development of
the speed and path optimisers in such trials will complete the development of a novel solution to
the minimum lap-time problem.
solution has been introduced, which requires the development of a high-quality path-tracking
controller. Preview Discrete Linear Quadratic Regulator (DLQR) theory has been used to generate
optimal tracking control gains for a given car model. The calculation of such gains are performed
off-line, reducing the computational burden during simulated tracking trials. A simple car model
was used to develop limit-tracking control strategies, first for an understeering and then for an
oversteering car, travelling at a constant forward speed. Adaptation in the controller, with respect
to front-/rear-lateral-slip ratio, facilitated superior tracking performance over the non-adaptive
counterpart in a number of challenging tracking manoeuvres.
Once complete, development work was focused on the control of a complex car model. Such
a model required an extension to the preview DLQR theory, to allow variable speed, two-channel
(x,y) optimal path tracking. Significant benefits were observed when using an adaptive control
strategy, firstly scheduling with respect to forward ground speed and then including adaptation
with respect to mean front-lateral-slip ratio. A variable weighting strategy was used to suppress
oscillations in the tracking controller when operating near the limit of the car. Such a strategy
places a higher cost on control effort expenditure, relative to tracking error, as the car approaches
the limit of the front axle. Further oscillatory behaviour, due to the presence of lightly-damped
eigenmodes, was suppressed by increasing the car’s suspension stiffness and damping parameters.
The tracking controller, that has resulted from the work documented by this thesis, has demonstrated
high-quality tracking when operating in a number of different scenarios, including lateral
limit tracking. Variable speed limit tracking is suggested as the next development step, which will
then allow the controller to be implemented in initial learning trials. Successful development of
the speed and path optimisers in such trials will complete the development of a novel solution to
the minimum lap-time problem.
Date Issued
2010-05
Date Awarded
2010-11
Advisor
Evangelou, Simos
Sharp, Robin
Sponsor
Williams-F1
Creator
Thommyppillai, Mark P.
Publisher Department
Mechanical Engineering and Electrical and Electronic Engineering
Publisher Institution
Imperial College London
Qualification Level
Doctoral
Qualification Name
Doctor of Philosophy (PhD)