Material and structural behaviour of rubberised alkali-activated concrete
File(s)
Author(s)
Elzeadani, Mohamed
Type
Thesis or dissertation
Abstract
This thesis examines the rate-dependent mechanical properties and structural behaviour of rubberised alkali-activated concrete (RuAAC). The constituents of alkali-activated concrete are selected to ensure high compressive strength and high workability. Crumb rubber particles are then added to replace up to 60% of the total natural aggregates by volume. The mechanical properties are examined under varying loading rates, including quasi-static, seismic and impact rates. The one-year creep response of RuAAC is also investigated. The test results acquired in the first part of the thesis are used to inform the development of analytical expressions and constitutive models for design purposes.
The second part of the thesis is concerned with assessing the effect of external confinement on the compressive behaviour of RuAAC using experimental and numerical methods. Two systems of external confinement are investigated: i) wrapping with fibre-reinforced polymer (FRP) sheets; and ii) using RuAAC as infill material in concrete-filled steel tubes (CFSTs). In both cases, the compressive behaviour is investigated while accounting for a wide range of practical design parameters and findings are drawn from the results of over 60 test specimens and 550 numerical models. The results are used to inform the development of design-oriented constitutive models for FRP-confined RuAAC and assess the adequacy of the axial capacity prediction equations available in codified provisions for CFSTs.
The last part of the thesis is concerned with the lateral cyclic behaviour of square steel tubes infilled with RuAAC, with particular focus on the stiffness, strength, ductility, and ultimate criteria. These key parameters are derived based on detailed experimental and numerical assessments covering a wide range of design parameters. The results are used to develop formulations for the member stiffness and buckling displacement. The adequacy of design guidelines for conventional composite sections available in current codified provisions are also assessed.
The second part of the thesis is concerned with assessing the effect of external confinement on the compressive behaviour of RuAAC using experimental and numerical methods. Two systems of external confinement are investigated: i) wrapping with fibre-reinforced polymer (FRP) sheets; and ii) using RuAAC as infill material in concrete-filled steel tubes (CFSTs). In both cases, the compressive behaviour is investigated while accounting for a wide range of practical design parameters and findings are drawn from the results of over 60 test specimens and 550 numerical models. The results are used to inform the development of design-oriented constitutive models for FRP-confined RuAAC and assess the adequacy of the axial capacity prediction equations available in codified provisions for CFSTs.
The last part of the thesis is concerned with the lateral cyclic behaviour of square steel tubes infilled with RuAAC, with particular focus on the stiffness, strength, ductility, and ultimate criteria. These key parameters are derived based on detailed experimental and numerical assessments covering a wide range of design parameters. The results are used to develop formulations for the member stiffness and buckling displacement. The adequacy of design guidelines for conventional composite sections available in current codified provisions are also assessed.
Version
Open Access
Date Issued
2024-06-14
Date Awarded
2024-09-01
Copyright Statement
Creative Commons Attribution NonCommercial Licence
License URL
Advisor
Elghazouli, Ahmed
Sponsor
President's PhD Scholarship at Imperial College London
Publisher Department
Civil and Environmental Engineering
Publisher Institution
Imperial College London
Qualification Level
Doctoral
Qualification Name
Doctor of Philosophy (PhD)
