Browsing by Sponsor/Funder AVIC Manufacturing Technology Institute

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 1 to 20 of 51  next >
Issue DateTitleAuthor(s)
Nov-2020A CDRX-based material model for hot deformation of aluminium alloysLi, Y; Gu, B; Jiang, S; Liu, Y; Shi, Z, et al
1-Sep-2021A comparative study on deformation mechanisms, microstructures and mechanical properties of wide thin-ribbed sections formed by sideways and forward extrusionZhou, W; Yu, J; Lu, X; Lin, J; Dean, TA, et al
23-Mar-2022A comparative study on the failure criteria for predicting the damage initiation in fibre-reinforced compositesZheng, J; Maharaj, C; Liu, J; Chai, H; Liu, H, et al
6-Feb-2022A new method to characterize and model stress-relaxation aging behavior of aluminum alloys under age forming conditionsLi, Y; Shi, Z;
1-Jul-2018A novel constitutive model for multi-step stress relaxation ageing of a pre-strained 7xxx series alloyZheng, J; Lin, J; Pan, R; Lee, J; Li, C, et al
24-Dec-2020A review on solid riveting techniques in aircraft assemblingZhao, H; Xi, J; Zheng, K; Shi, Z; Lin, J, et al
23-Feb-2021A study of functionally graded lattice structural design and optimisationWang, X; Zhu, L; Sun, L; Li, N;
1-Mar-2019A study of thermomechanical behaviour and grain size evolution of AA7050 under hot forging conditionsLi, W; Liu, Y; Jiang, S; Luan, Q; Li, Y, et al
4-Sep-2020A study on the hot roll bonding of aluminum alloysZinong, T; Bing, Z; Jun, J; Zhiqiang, L; Jianguo, L, et al
15-Nov-2020A three-dimensional elastic-plastic damage model for predicting the impact behaviour of fibre-reinforced polymer-matrix compositesLiu, H; Liu, J; Ding, Y; Hall, ZE; Kong, X, et al
1-Dec-2018Acoustic resonance testing of additive manufactured lattice structureIbrahim, Y; Li, Z; Davies, C; Maharaj, C; Dear, J, et al
31-Oct-2019An analytical solution for elastic buckling analysis of stiffened panel subjected to pure bendingZhou, W; Li, Y; Shi, Z; Lin, J;
15-Nov-2017An integrated method for net-shape manufacturing components combining 3D additive manufacturing and compressive forming processesJiang, J; Hooper, P; Li, N; Luan, Q; Hopper, C, et al
1-Jan-2019An investigation of creep age forming of AA7B04 stiffened plates: Experiment and FE modellingLyu, F; Li, Y; Huang, X; Shi, Z; Zeng, Y, et al
1-Feb-2020Combining microstructural characterization with crystal plasticity and phase-field modelling for the study of static recrystallisation in pure aluminiumLuan, Q; Lee, J; Zheng, J; Hopper, C; Jiang, J, et al
1-Apr-2019Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: an experimental and numerical studyLiu, H; Falzon, B; Li, S; Tan, W; Liu, J, et al
1-Mar-2021Deep learning in sheet metal bending with a novel theory-guided deep neural networkLiu, S; Xia, Y; Shi, Z; Yu, H; Li, Z, et al
12-Oct-2020Development of constitutive equations for hot working of titanium matrix compositesDu, L; Shi, Z; Han, Y; Shao, J; Zheng, K, et al
1-Oct-2020Effects of impactor geometry on the low-velocity impact behaviour of fibre-reinforced composites: an experimental and theoretical investigationLiu, H; Liu, J; Ding, Y; Zhou, J; Kong, X, et al
Aug-2021Elastic-plastic buckling analysis of stiffened panel subjected to global bending in forming processZhou, W; Shi, Z; Li, Y; Rong, Q; Zeng, Y, et al